| German | English | Français | Home | General terms and conditions | Contact | Sitemap |
Products | Sensors ExCos.. 
Sensors for Ex-areas
ATEX 94/9/EC | zone 1, 2, 21, 22
Differential pressure-/VAV-Sensors ΔP
Measurements in mm
Technical data
Measurement range*Min. range*Overload protected*Electric supplyOutputDisplayHousing protectionAmbient temperature/-humidityPower supplyWeightExplosion proof for allInstallation area ModulCertification for gasesCertification for dust*dependent by TypeExCos-P
± 100 Pa - ± 7.500 Pa20 Pa25.000 Pa - 120.000 Pa24 VAC / DC0-10 V DC, (0)4-20 mA, selectable on siteBacklit, defeatableIP 66-20°...+50°C, 0...95 %rHover integrated terminal boxca. 950 g (Aluminium housing)gases, mists, vapours, dustzone 1, 2, 21, 22II2(1)G Ex ema [ia] IIC T6II2(1)D Ex tD A21 [iaD] IP66 T80°C
to the technical data sheetsDelivery – ExCos-P..
- 1 × Sensor ExCos-P with integrated Ex-e terminal box
- 3 × Tapping screw Ø 4,2 × 13 mm
- 1 × Short circuit tube ca. 140 mm length
Special models – ExCos-P..-A
- Modul with one intrinsically 4..20 mA output to connect external actual value indicator
Accessories – ExCos-P..
- Intrinsic, external LCD indicator connectable to ExCos-P..-A sensors, mounting in hazardous areas zone 1, 2, 21, 22
- Mounting-bracket for installation on round air-ducts up to Ø 600 mm
- „Installation kit 2“ includes 2 m pressure hose Ø 6 mm inner diameter,
2 plastic fittings
Technical data
Measurement range Temperature*Measurement range Humidity*ApplicationElectric supplyConnectable sensorsOutputDisplayHousing protectionAmbient temperature/-humidityPower supplyWeightExplosion proof for allInstallation area ModulCertification for gasesCertification for dust*dependent by sensor typeExCos-D
-40 °C...+125 °C0...100 %rHRoom- and / or Duct-measurement24 VAC / DC1 × ExPro-C.. Sensor0-10 V DC, (0)4-20 mA, selectable on siteBacklit, defeatableIP 66-20°...+50°C, 0...95 %rHover integrated terminal boxca. 950 g (Aluminium housing)gases, mists, vapours, dustzone 1, 2, 21, 22II2(1)G Ex ema [ia] IIC T6II2(1)D Ex tD A21 [iaD] IP66 T80°CDelivery – ExCos-D..
- 1 × Module ExCos-D with integrated Ex-e terminal box
- 3 × Tapping screw Ø 4,2 × 13 mm
- Required accessory: ExPro-C.. Sensor
Special models – ExCos-D-A
- Modul with two intrinsic 4..20 mA outputs to connect Ex-i external
actual value indicator (Output 1 for °C, Output 2 for %rH)
Accessories – ExCos-D..
- ExPro-C.. digital sensors
- Intrinsic, external LCD indicator connectable to ExCos-DA transducer, mounting in hazardous areas zone 1, 2, 21, 22
- Mounting-bracket for installation on round air-ducts up to Ø 600 mm
Technical data
Electric supplyConnectable sensors (passive sensors)OutputDisplayHousing protectionAmbient temperature/-humidityPower supplyWeightExplosion proof for allInstallation area ModulCertification for gasesCertification for dust
ExCos-A
24 VAC / DCmodulating, passive, potential free, Type ExSens:Pt 100, Pt 500, Pt 1000, Ni 100, Ni 200,
Ni 500, Ni 1000, Ni 1000 Siemens, KP 250, Resistance output 0...1 kOhm, 0...10 kOhm0-10 V DC, (0)4-20 mA, selectable on siteBacklit, defeatableIP 66-20°...+50°C, 0...95 %rHover integrated terminal boxca. 950 g (Aluminium housing)gases, mists, vapours, dustzone 1, 2, 21, 22II2(1)G Ex ema [ia] IIC T6II2(1)D Ex tD A21 [iaD] IP66 T80°C
Delivery – ExCos-A..
- 1 × Sensor ExCos-A with integrated Ex-e terminal box
- 3 × Tapping screw Ø 4,2 × 13 mm
- Required accessory: passive sensor, series ExSens
Special models – ExCos-A-A
- Modul with one additional intrinsically 4..20 mA output to connect a
Ex-i external actual value indicator
Accessories – ExCos-A..
- Intrinsic, external LCD indicator connectable to ExCos-AA transducer, mounting in hazardous areas zone 1, 2, 21, 22
- Mounting-bracket for installation on round air-ducts up to Ø 600 mm
Colour coding
Products for
zone 1, 2, 21, 22
(Example ExMax)
Products for
zone 2, 22
(Example RedMax)
Products for
safe area
(Example InMax)
Schischek GmbH Explosionproof
• Email: info-de@schischek.com • Phone: +49 (0) 9101 9081-0
Copyright © 1975-2010 Schischek GmbH