Max-5.10-Y, Max-5.10-Y-CTS, Max-5.10-Y-VAS

Mechanical properties	min.	typ.	max.	unit
Motor torque (can be configured with rotary switch)*		5 / 10		Nm
Motor runtime for 90° (can be configured with rotary switch)*		7.5 15 30 60 120		s
Minimum angle of rotation*		-5		°
Maximum angle of rotation*		90		°
Weight* Max-5.10-Y Max-5.10-Y-CTS Max-5.10-Y-VAS		3.5 3.5 5.3		kg kg kg

Dimensions	min.	typ.	max.	unit
Max-5.10-Y L W H	–1 –1 –1	210 96 80	+1 +1 +1	mm mm mm
Max-5.10-Y-CTS L W H	–1 –1 –1	210 96 80	+1 +1 +1	mm mm mm
Max-5.10-Y-VAS L W H	–1 –1 –1	211 96 81	+1 +1 +1	mm mm mm
Hollow shaft double square	12 x 12			mm
Allen key provided for manual adjustment in accordance with these instructions*		3		mm

Electrical characteristics	min.	typ.	max.	unit
Minimum nominal voltage (at room temperature)	–10 %	24	+10 %	VAC/DC
Maximum nominal voltage (at room temperature)	–10 %	240	+10 %	VAC/DC
Minimum mains frequency	–20 %	50	+20 %	Hz
Maximum mains frequency	–20 %	60	+20 %	Hz
Nominal current (at room temperature)	Power consumption as a function of supply voltage
Power consumption standby*		5		W
Power consumption heating mode*		16		W
Power consumption in operation	Power consumption as a function of supply voltage
Switch-on peak at 24 VDC (for approx. 2 seconds)* at 240 VDC (for approx. 2 seconds)*		2 2		A A
Maximum duty cycle for motor run time 7.5 s, 15 s, 30 s, 60 s, 120 s	100			%

Electrical connection options
3-point with spring return with configurable spring return period continuous	Cable type 5+PE, cable diameter 7.5 mm / cable type 6, cable diameter 7.4 mm
1-wire with spring return with configurable spring return period continuous	Cable type 5+PE, cable diameter 7.5 mm / cable type 6, cable diameter 7.4 mm
1-wire with spring return continuous without feedback signal	Cable type 5+PE, cable diameter 7.5 mm / cable type 6, cable diameter 7.4 mm
3-point with spring return with configurable spring return period continuous feedback signal	Cable type 5+PE, cable diameter 7.5 mm / cable type 6, cable diameter 7.4 mm

Activation CONTROL	min.	typ.	max.	unit
Angle of rotation and position indicator		95		°
Precision electrical*		~100		Step
Activation Y	0 4		10 20	VDC mA
Performance data Y and U Activation Y_U (for 10 kΩ output impedance) Activation Y_I (for 100 Ω load / output impedance) Feedback U_U (for 10 kΩ…∞ Ω input impedance) Feedback U_I (for 0…800 Ω load / input impedance)	0 4 0 4		10 20 10 20	VDC mA VDC mA
Inverting	Setting up wire bridges between terminals 3 and 4

Environmental conditions	min.	typ.	max.	unit
Humidity (not condensing)			90	% rH
Protection class as per DIN EN 60529	IP66
Operation
Ambient temperature (T6) Ambient temperature (T5)	–40 –40		+40 +50	°C °C
Storage
Ambient temperature	–40		+70	°C

*: Nominal value: please note that nominal values are also subject to tolerances. For more detailed information, see: Note on nominal values