Rotork-Schischek contact worldwide Certification with highest protection classes Applications for chemistry, pharmacy and general industry Applications for HVAC systems, sewage plants, landfills, power plants Applications for FPSO, ship-building, offshore, onshore Rotork-Schischek – Home Rotork-Schischek – Home

Company

you are here

Products/Solutions

Explosion Proof

Application Areas

Service/Downloads

Contact

Products | Binary offshore sensors ..Bin..-CT / ..-OCT Schischek GmbH ExplosionproofEx..Red..In..CT/OCT..

Seawater resistant, binary sensors for Ex- or safe area
Offshore/marine coated, some parts in stainless steel / nickel-plated

..Bin-P..-CT

Binary differential pressure switch (Pressostat) ΔP
Offshore/marine coated (Seawater resistant)

Measurements ..Bin-P-CT sensor: L × W × H = 187 × 107 × 66 mm

Measurements in mm

Description – Offshore/marine coated binary diff.pressure switch ..Bin-P..-CT

  • ExBin-P..-CT, RedBin-P..-CT and InBin-P..-CT pressure switches with
    an excellent resistance to chemicals and sea water for HVAC systems,
    e.g. for differential pressure control for filter- or fan belt monitoring
  • Aluminium housing offshore/marine coated, seawater resistant
  • Sensor connection and cable glands Ex-e approved, nickel-plated,
    screws in stainless steel 316L
  • No additional module in the panel required
  • No intrinsically safe wiring required
  • All parameters adjustable on site w/o additional tools/meas. devices

..Bin-P..-CT

0...500 Pa, 0...5.000 Pa1-channel or 2-channel adjustable5.000 Pa...50.000 Pa24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mmPotential free switching contact adjustable per menuLCD Backlight, defeatable
Switching status LEDs
IP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)

Delivery – ..Bin-P..-CT

  • 1 × Offshore/marine coated, seawater resistant pressure switch
    ..Bin-P..-CT with integrated Ex-e terminal box
  • 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
  • 1 × Short circuit tube ca. 140 mm length

Special models – ..Bin-P..-2-CT

  • Offshore/marine coated, seawater resistant, pressure switch with two switching outputs (2 × potential free contacts)

Accessories – ..Bin-P..-CT

  • Mounting bracket for round air ducts up to Ø 600 mm
  • Installation kit with 2 m flexible pressure hose Ø 6 mm
  • Stainless steel pressure tube connection for 6 mm clamp fittings
  • M16 standard cable glands in brass nickel plated
  • M20 Ex-d cable glands in brass nickel plated for armoured cables
    (Offshore applications)
..Bin-P..-OCT

Binary differential pressure switch (Pressostat) ΔP
Seawater resistant Offshore version

Measurements ..Bin-P..-OCT sensor: L × W × H = 187 (170/213) × 107 × 66 mm

Measurements in mm

Description – Offshore/marine coated, differential pressure switch ..Bin-P..-OCT

  • ExBin-P..-OCT, RedBin-P..-OCT and InBin-P..-OCT pressure switches with
    an excellent resistance to chemicals and sea water (Offshore version) for HVAC systems, e.g. for differential pressure control for filter- or fan belt monitoring
  • Aluminium housing offshore/marine coated, seawater resistant
  • Cable glands Ex-e approved, nickel-plated, tubes for clamping ring
    Ø 6 mm and screws in stainless steel 316L
  • No additional module in the panel required
  • No intrinsically safe wiring required
  • All parameters adjustable on site w/o additional tools/meas. devices

..Bin-P..-OCT

0...500 Pa, 0...5.000 Pa1-channel or 2-channel adjustable5.000 Pa...50.000 Pa24 VAC / DCM20 × 1,5 / Ex-e approved, nickel-platedØ 6...13 mmPotential free switching contact adjustable per menuLCD Backlight, defeatable
Switching status LEDs
IP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)

Delivery – ..Bin-P..-OCT

  • 1 × Offshore/marine coated, seawater resistant pressure switch (Offshore version) ..Bin-P..-OCT with integrated Ex-e terminal box
  • 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
  • 1 × Short circuit tube ca. 140 mm length

Special model – ..Bin-P..-2-OCT

  • Offshore/marine coated, seawater resistant, Offshore pressure switch with two switching outputs (2 × potential free contacts)

Accessories – ..Bin-P..-OCT

  • Mounting bracket for round air ducts up to Ø 600 mm
  • Installation kit with 2 m flexible pressure hose Ø 6 mm
  • Stainless steel pressure tube connection for 6 mm clamp fittings
  • M16 standard cable glands in brass nickel plated
  • M20 Ex-d cable glands in brass nickel plated for armoured cables
    (Offshore applications)
..Bin-FR..-CT

Frost protection thermostat – binary °C
Offshore/marine coated (Seawater resistant)

Measurements ..Bin-FR-CT sensor: L × W × H = 187 × 107 × 66 mm

Measurements in mm

Description – Offshore/marine coated frost protection thermostat ..Bin-FR..-CT

  • ExBin-FR..-CT, RedBin-FR..-CT and InBin-FR..-CT are frost protection thermostats for HVAC systems with an excellent resistance to chemicals and sea water, e.g. frost protection monitoring of heating registers /
    heat exchangers
  • Aluminium housing offshore/marine coated, seawater resistant
  • Cable glands Ex-e approved, nickel-plated, screws in stainless steel 316L
  • No additional module in the panel required
  • No intrinsically safe wiring required
  • Switch-point mechanically adjustable

..Bin-FR..-CT

-10 °C...+15 °C1-stage (1-channel)3 meters or 6 meters24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mm~ 40 cm1 potential-free contactSwitching status with LEDsIP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)

Delivery – ..Bin-FR..-CT

  • 1 × Offshore/marine coated, seawater resistant frost protection thermostat with integrated Ex-e terminal box and 3 m or 6 m capillary (dependent by type)
  • 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm

Accessories – ..Bin-FR..-CT

  • Cappillary duct, assembly cramp and 4 assembly brackets for ..Bin-FR-3
  • Cappillary duct, assembly cramp and 8 assembly brackets for ..Bin-FR-6
  • Mounting bracket for round air ducts up to Ø 600 mm
  • M16 standard cable glands in brass nickel plated
  • M20 Ex-d cable glands in brass nickel plated for armoured cables
    (Offshore applications)
..Bin-N..-CT

Fan belt monitoring, binary Umin¹
Offshore/marine coated (Seawater resistant)

Measurements ..Bin-N-CT sensor: L × W × H = 187 × 107 × 66 mm

Measurements in mm  

Description – Offshore/marine coated fan belt guard via speed control ..Bin-N..-CT

  • ExBin-N..-CT, RedBin-N..-CT and InBin-N..-CT for fan belt monitoring
    (V-belt guard, via speed control of fan drive shaft) in HVAC systems,
    with an excellent resistance to chemicals and sea water atmosphere
  • Aluminium housing offshore/marine coated, seawater resistant
  • Cable glands Ex-e approved, nickel-plated, screws in stainless steel 316L
  • No additional module in the panel required
  • No intrinsically safe wiring required
  • Switch-point in min¹ is digitally adjustable
  • Integrated, adjustable time switch relais

..Bin-N..-CT

0...10.000 min¹1-stage or 2-stage, 50...10.000 min¹24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mmNamur transmitter inductive, DIN 19234Potential free switching contact adjustable per menuLCD Backlight, defeatable
Switching status LEDs
IP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)

Delivery – ..Bin-N..-CT

  • 1 × Offshore/marine coated, seawater resistant fan belt monitoring module with integrated terminal box and directly mountable Namur transmitter
  • 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm

Special models – ..Bin-N-2-CT

  • Offshore/marine coated, seawater resistant version ..Bin-N-2-CT with
    2-stage switch point (2 × potential-free contacts)

Accessories – ..Bin-N..-CT

  • Mounting set for Namur transmitter onto ventilators/propellers up to approx. 20.000 m³/h (Empirical values – they can vary depending on the construction of ventilator/propeller)
  • Mounting set for Namur transmitter onto ventilators/propellers over
    approx. 20.000 m³/h (Empirical values...)
  • Mounting bracket for round air ducts up to Ø 600 mm
  • M16 standard cable glands in brass nickel plated
  • M20 Ex-d cable glands in brass nickel plated for armoured cables
    (Offshore applications)
..Bin-D..-CT

Thermostat / Hygrostat – binary°C %rH
Offshore/marine coated (Seawater resistant)

Description – Offshore/marine coated thermostat / hygrostat ..Bin-D..-CT

  • ExBin-D..-CT, RedBin-D..-CT and InBin-D..-CT for use as thermostat or hygrostat together with ExPro-B.. sensor in HVAC systems, with an excellent resistance to chemicals and sea water atmosphere
  • Aluminium housing offshore/marine coated, seawater resistant
  • Cable glands Ex-e approved, nickel-plated, screws in stainless steel 316L
  • No additional module in the panel required
  • No intrinsically safe wiring required
  • Selectable on site if used for room or duct application
  • Switch-point for °C and %rH is separately adjustable (dependent on
    sensor type)
  • Adjustable directly on site without additional tools / meas. devices

..Bin-D..-CT

-40 °C...+125 °C0...100 %rHRoom- and / or Duct-measurement24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mm1 × ExPro-B.. (1 × InPro-B.. by InBin-D-CT)Potential free switching contact adjustable per menuLCD Backlight, defeatable
Switching status LEDs
IP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)

Delivery – ..Bin-D..-CT

  • 1 × Offshore/marine coated, seawater resistant module with
    integrated terminal box and socket for one ExPro-B.. sensor
  • 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
  • Required accessory: ExPro-B.. sensor, InPro-B.. for InBin-D-CT

Special models – ..Bin-D-2-CT

  • Offshore/marine coated, seawater resistant module with 4-stage
    output (4 pot.-free contacts = 2 × °C, 2 × %rH)

Accessories – ..Bin-D..-CT

..Bin-A..-CT

Switching modules – binary°C %rH ΔP
Offshore/marine coated (Seawater resistant)

Description – Offshore/marine coated switching module ..Bin-A..-CT

  • ExBin-A..-CT and RedBin-A..-CT are switching modules for direct mounting in Ex areas for HVAC systems (Heating, Ventilating and Air Conditioning) with an excellent resistance to chemicals and sea water
  • InBin-A..-CT for mounting in safe area (industrial applications)
  • Aluminium housing offshore/marine coated, seawater resistant
  • Cable glands Ex-e approved, nickel-plated, screws in stainless steel 316L
  • Connection of 1, 2 or 5 passive, potential-free binary sensors
  • No additional module in the panel required
  • No intrinsically safe wiring required

..Bin-A..-CT

24 VAC / DCM16 × 1,5 / Ex-e approved, nickel-platedØ 5...10 mmThermostats TBR-2.., TBK.., TBT..
Humiditystats FBR-2G.., FBK-2G..
Diff. pressure switch DBK..,
Air flow switch WFBK-2G..
Frost protection thermostat TBK-FR-2G..
Potential-free switching contactActual value indication LEDsIP66 / Aluminium, offshore/marine coated-20°...+50°C, 0...95 %rHintegrated Ex-e terminal box~ 1,1 kgGases, mists, vapours, dustZone 1, 2, 21, 22Zone 2, 22Safe area (industrial applications)

Delivery – ..Bin-A..-CT

  • 1 × Offshore/marine coated, seawater resistant switching module
    with socket for 1, 2 or 5 binary ExSens sensors (dependent by type)
  • 3 × Tapping screw in stainless steel Ø 4,2 × 13 mm
  • Optional accessory: Binary sensors series ExSens

Accessories – ..Bin-A..-CT

  • Mounting bracket for round air ducts up to Ø 600 mm
  • M16 standard cable glands in brass nickel plated
  • M20 Ex-d cable glands in brass nickel plated for armoured cables
    (Offshore applications)
back to Product choice
to the top

Schischek News

New content on Schischek Homepage

Colour Code

ATEX products for
zone 1, 2, 21, 22
(e.g. ExMax+LIN)

ATEX products for
zone 2, 22
(e.g. RedMax+LIN)

Products for
safe area
(e.g. InMax+LIN)

Offshore/Marine
Coated versions
(e.g. ..Bin..-CT / OCT)

Stainless steel versions AISI 316
(e.g. ExCos-V)